Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Beaumont?
Panel replacement in Beaumont typically costs $250-$500 for a single damaged section, including the new panel and the labor to hang it. A two-panel repair on a wide double door runs toward the upper half of that range, while one standard panel on a single-car door usually lands near the bottom. The written estimate sets the final price, and we give you that number before any work starts.
If a panel is dented, cracked, or bent out of its stile, you don’t need a whole new door. You need the section that failed, matched to the profile and color of the door you already own. That’s the job we do across Beaumont, and it’s usually a one-visit fix when the panel is in stock at the supplier. Here’s what it actually costs and what moves the price.
Key Takeaways
- Typical range: $250-$500 for a standard single-panel replacement in Beaumont.
- What’s included: the panel, the labor to remove the damaged section, and re-hanging it in the track.
- What pushes it up: non-standard widths, discontinued colors, insulated or windowed panels, and bent tracks that need straightening first.
- What keeps it down: a photo of the door sent ahead of time so we can confirm the panel before the visit.
- Free estimates: we look, we explain what failed, and we give you a number in plain language before anything is approved.
Panel Replacement Cost Breakdown (2026)
Here’s how the $250-$500 range splits out for a typical Beaumont panel job. These are estimated ranges for the work and materials together, not a menu you add up line by line. Your written estimate is the number that counts.
| Item | Typical estimated range |
|---|---|
| Single standard panel replacement (steel, single-car door) | $250-$350 |
| Single panel replacement (insulated or with a window insert) | $300-$450 |
| Two-panel replacement on a double door | $400-$500 |
| Track realignment if a bent track caused the panel damage | $120-$240 |
| Roller replacement while the door is open | $110-$220 |
| Opener repair if the opener contributed to the impact | $120-$320 |
| Full garage door repair (panel plus related fixes) | $150-$600 |
The panel itself is usually the smaller part of the bill. Labor to open the door, pull the hinge at the section line, slide the old panel out, and hang the new one sits behind most of the cost. What moves the number up is anything that means the technician can’t simply swap a section: a discontinued color that has to be ordered, a panel with a window that comes from a different supplier line, or a track that was bent in the same impact and now won’t let the new panel sit flat. What moves it down is having the panel on hand. Because we work across Clopay, Amarr, Wayne Dalton, Raynor, and the rest of the eight brands we service, we can usually match the profile and color to your existing door instead of quoting a full replacement.
What Affects Panel Replacement Pricing in Beaumont
Beaumont’s climate and housing stock shape how these jobs go. Winters are mild, so we’re not fighting frozen tracks, but the humid Gulf-side summers mean steel panels take a beating from moisture and the sun, and a panel that’s already rusting at the bottom edge will sometimes fail faster than a cleaner one. Homes across the city range from older single-car garages in the South End to newer builds out toward the West End, and each brings its own quirk. Here are the factors we look at.
- Panel size and door width. A standard single-car door takes a narrower panel than a double-car door. The wider the section, the more material and the higher the price, which is why two-panel work on a double door tops the range.
- Brand and profile match. Matching your existing door matters. A Clopay or Amarr panel has a specific profile and rib pattern; if we can match it, the repair is straightforward. If the door is an older model with a discontinued panel, we may need to order it, and that adds time and cost.
- Insulated vs. non-insulated. Insulated panels cost more than plain steel. If your door is insulated and you want the new section to match in both look and performance, expect to sit in the upper half of the range.
- Window inserts. A panel with a window or decorative insert has to be sourced from the right supplier line, and that usually pushes the price up by a step.
- Condition of the tracks and rollers. A panel that got hit usually took the track with it. If the track is bent, we straighten or replace it first, or the new panel won’t sit true. That’s why track realignment at $120-$240 often shows up on the same estimate.
- Whether the opener is involved. If the opener drove the door into something or the door came off its track because of an opener fault, we check the opener too. Opener repair runs $120-$320 and is a separate line on the estimate.
One thing we won’t do is quote a panel when the door needs something else. If the spring is the real problem or the door is off its track, we’ll tell you, and we’ll walk you through exactly what failed and what it takes to fix it before you approve anything.
How to Save on Panel Replacement
The single biggest cost saver is confirming the panel before we arrive. Send us a photo of the whole door and a close-up of the damaged section, and we can check the profile against the brands we service so the first visit is also the last one. Here’s what else helps.
- Fix the track before it bends the panel. A door that’s tracking hard on one side will wear a panel out. Addressing a $120-$240 track realignment early can save a panel replacement later.
- Replace one panel, not the door. A whole new door runs $700-$2,200. If only one section is damaged and the rest of the door is sound, replacing that section keeps you in the $250-$500 range.
- Bundle small fixes. If the rollers are shot or the opener is acting up, having those looked at during the same visit is cheaper than booking a second trip. Roller replacement is $110-$220 and opener repair is $120-$320.
- Get the diagnosis in writing. Our transparency standard is simple: a clear diagnosis and a plain-language explanation of the problem and cost before any work is approved. That means no surprise line items after the door is already open.
- Ask about the estimate up front. Estimates are free. Call (833) 549-9776 and we’ll book a visit to look at the door and give you a number.
If you’re weighing a repair against a replacement, it helps to know the full picture. A dedicated specialist can tell you whether a panel swap is enough or whether a new door makes more sense for your home. We handle repair, opener repair, and full installation, so you don’t need to bring in a second company to finish the job. You can read more about Lantern Garage Door Repair and how we work, or see our Beaumont service area for details on scheduling.
Repair or Replace: Which Makes Sense?
If the door frame is straight, the springs are sound, and only one or two panels are damaged, repair usually wins on cost. A panel replacement at $250-$500 is a fraction of a new door at $700-$2,200, and it keeps the door you already have. Replacement starts to make sense when the damage is spread across several panels, the door is an older model with discontinued sections, or the frame and tracks have taken repeated hits. We’ll tell you which side of that line your door sits on, with the numbers to back it up.
What the Visit Looks Like
When we come out, the first thing we do is look at the whole door, not just the panel. We check the springs, cables, rollers, and tracks because a damaged panel is often a symptom of something else. Then we explain what we found in plain language and give you a written estimate. If you approve it, we do the work. If the panel has to be ordered, we tell you the timeline up front so there are no surprises. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Our technicians have up to 9 years of experience, and they work across the eight brands we service: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means whether your Clopay panel took a hit or your Wayne Dalton door is out of alignment, the technician recognizes the system instead of guessing. We don’t claim dealer status or manufacturer certification for any brand. What we do claim is hands-on familiarity with how each one is built and how to source the right part.
Why a Specialist for Panel Work
A generalist contractor treats a garage door as one of dozens of jobs and rotates between trades. We don’t. Garage doors are the only thing we do, which means the diagnosis is sharper and the fix is usually faster. When a panel needs replacing, we know which brands match which profiles, which panels are stocked and which have to be ordered, and how the track, rollers, and springs interact with the new section. It’s the difference between a company that has seen your door type once and one that sees it every week.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Beaumont?
Panel replacement in Beaumont typically costs $250-$500 for a single panel, including the panel and labor. A two-panel job on a double door runs toward the top of that range, and an insulated or windowed panel adds to it. Call (833) 549-9776 for a free estimate and a number for your specific door.
Can you replace just one panel, or do I need a whole new door?
You can usually replace just the damaged panel. If one section is dented or cracked and the rest of the door is sound, a single-panel replacement at $250-$500 is the cost-effective fix, compared with $700-$2,200 for a new door. We’ll confirm after looking at the whole door. Call (833) 549-9776 to book a look.
How long does a panel replacement take?
Most single-panel replacements are done in a single visit, often within a couple of hours once the correct panel is on hand. If the panel has to be ordered because the color or profile is discontinued, the timeline stretches to match the supplier. Call (833) 549-9776 and we’ll tell you what to expect for your door.
Does panel replacement cost more if the track is bent?
Yes, if the track needs straightening or replacing. Track realignment typically runs $120-$240 on top of the panel cost, and it’s often necessary because the same impact that bent the panel also bent the track. Leaving a bent track alone will damage the new panel. Call (833) 549-9776 for an estimate that covers both.
Is it cheaper to repair or replace my garage door?
Repair is almost always cheaper when the damage is limited to one or two panels and the frame is straight. A panel replacement at $250-$500 beats a new door at $700-$2,200. Replacement makes more sense when damage is widespread or the door is an older model with hard-to-find panels. Call (833) 549-9776 and we’ll walk you through which way makes sense for your door.
Get a Clear Number Before You Approve Anything
If a panel on your Beaumont door is damaged, the fix is usually simpler and cheaper than you expect. We look at the whole door, explain what failed, and give you a written estimate in plain language before any work begins. Estimates are free. Our technicians have up to 9 years of experience, and we service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Call (833) 549-9776. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Beaumont market as of 2026. Lantern Garage Door Repair offers free estimates – call (833) 549-9776.
Written by the team at Lantern Garage Door Repair.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Keisha Hampton"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Javier Herrera"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Salma Haddad